-
Decorative-Paints
-
Hardner
-
Industrial-Paints
-
Powder-coating-Paints
-
Thinner
Polyurethane Primer
Color: Gray, other color on request
Finish: Matt
Product description:It is used for concrete surfaces. It has strength at sunshine, heat, water, oil, chemicals and oil infusion
Finish: Matt
Product description:It is used for concrete surfaces. It has strength at sunshine, heat, water, oil, chemicals and oil infusion
Technical data:
| Description: | It is a two pack quick drying polyurethane primer, color retentive, excellent UV resistant, suitable for environmental condition where other coating cannot be applied |
| Area of application: | Steel, wood, concrete, cement, galvanized, aluminum & masonry surfaces |
| Physical constants: | |
| Color: | Gray, other color on request |
| Finish: | Matt |
| Viscosity: | 140-150 sec with cup 4 |
| Specific gravity: | 1.3-1.5 gr/100 cc |
| Solid: | 70-75 |
| Spreading rate: | Grey 14-16 M2/Lit depending on method of application and coat thickness |
| Drying time: | Touch dry max 1-1.5hours at 25°C |
| Drying time: | dry to handle max 5-6 hours Full cure O/N Dry to recoat min 12 hours at 25°C |
| Shelf life: | 1 year at 20 °C |
| Pot life: | 4 hours at 25 °C |
| Application details: | |
| Mixing ratio: | component A refer to can label/ component B refer to can label |
| Method of application: | Brush, roller or spray |
| Thinning: | Thinner TC-9918 |
| Air Spray: | Nozzle orifice:1.2-2 Nozzle pressure:3-5 Bar |
| Airless Spray: | Nozzle orifice:0.38 – 0.48 Nozzle pressure:120-150 Bar |
| Film thickness: | (DFT) 40-50 MIC (WET) 85-105 MIC |
| Surface Preparation: | Surface should be dry & free from dust |
Polyurethane Top coat
Color: white, other color on request
Finish: Gloss
Product description: This coverage is used as the final layer in multilayer systems of coating
Finish: Gloss
Product description: This coverage is used as the final layer in multilayer systems of coating
Technical data:
| Description: | It is a two pack quick drying polyurethane, color retentive, glossy conventional, excellent UV resistant, suitable for environmental condition where other coating cannot be applied |
| Area of application: | Steel, wood, concrete, cement, galvanized, aluminum & masonry surfaces |
| Physical constants: | |
| Color: | white, other color on request |
| Finish: | Gloss |
| Viscosity: | 100-120 sec with cup 4 |
| Specific gravity: | 1.2-1.3 gr/100 cc |
| Solid: | 60-63 |
| Spreading rate: | 10-13 M2/Lit depending on method of application and coat thickness |
| Drying time: | Touch dry max 1-1.5 hours at 25 °C Dry to handle max 8-12 hours Full cure 7 days Dry to recoat 12 hours at 25 °C |
| Shelf life: | 1 year at 20°C |
| Pot life: | 4 hours at 25°C |
| Recoating interval: | Stoving 70°C 30 min |
| Application details: | |
| Mixing ratio: | component A refer to can label/ component B refer to can label |
| Method of application: | Brush, roller or spray |
| Thinning: | Thinner TC-9918 |
| Air Spray: | Nozzle orifice 1.2-2 Nozzle pressure 3-5 Bar |
| Airless Spray: | Nozzle orifice 0.38 – 0.48 mm Nozzle pressure 120-150 Bar |
| Film thickness: | (DFT) 35-45 MIC (WET) 75-100 MIC |
| Surface Preparation: | Surface should be dry & free from dust |
Semi-gloss Polyurethane
Color: white, other color on request
Finish: Semi-gloss
Product description: This paint is used for protected of metal structure in corrosion agents and so it has good resistance at sunshine, UV, heat , water, chemicals, oil infusion and you can use from it in the cover coating systems for all of the metal, concrete, wood, and galvanized surfaces
Finish: Semi-gloss
Product description: This paint is used for protected of metal structure in corrosion agents and so it has good resistance at sunshine, UV, heat , water, chemicals, oil infusion and you can use from it in the cover coating systems for all of the metal, concrete, wood, and galvanized surfaces
Technical data:
| Description: | It is a two pack quick drying polyurethane, color retentive, excellent UV resistant, where other condition for environmental suitable coating cannot be applied |
| Area of application: | Steel, wood, concrete, cement, galvanized, aluminum & masonry surfaces |
| Physical constants: | |
| Color: | white, other color on request |
| Finish: | Semi-gloss |
| Viscosity: | 140-150 sec with cup 4 |
| Specific gravity: | 1.3-1.5 gr/100 cc |
| Solid: | 68-75 |
| Spreading rate: | 10-13 M2/Lit depending on method of application and coat thickness |
| Drying time: | Touch dry max 1-2 hours at 25 °C Dry to handle max 5-6 hours Full cure O/N Dry to recoat 12 hours at 25°C |
| Shelf life: | 1 year at 20°C |
| Pot life: | 4 hours at 25°C |
| Application details: | |
| Mixing ratio: | A refer to can label/ B refer to can label |
| Method of application: | Brush, roller or spray |
| Thinning: | TC-9918 |
| Air Spray: | Nozzle orifice 1.2-2 Nozzle pressure 3-5 Bar |
| Airless Spray: | Nozzle orifice 0.38 – 0.48 Nozzle pressure 120-150 |
| Film thickness: | (DFT) 40-50 MIC (WET) 85-105 MIC |
| Surface Preparation: | Surface should be dry and free from dust |
Factory
Address: No21 - North Talash St - Industrial Estate of Mashhad - Mashhad - Iran
Tel: (+98511) 2453358 – 2453143
Fax: (+98511) 2453361
Center office
Address: No.269 - Mosala 13 St - Mosla Blv - Mashhad - Iran
Postal code: 9167685787
Tel: (+98511) 3642065 - 3648351
Fax: (+98511) 3647629